In the cleaning process, to prevent damage to the shredder parts, it is necessary to unclog the oil holes on the bearings, and then use clean gauze or cotton wool to plug in the orifice to prevent dirt from entering. Than pulleys, gears, shredder blades, etc. It is necessary to coincide with the center of rotation, otherwise, the shredder in production, because the center of gravity will affect the use of mechanical equipment. After the end of the shredder, check whether the wrench and other things are left in the shredding cavity, the power supply is connected, the first boot 3 ~ 4 seconds, no abnormal sound or boom in the normal production.

In the shredder to the failure to repair, the equipment must be dismantled to view the repair, for the lack of contact, dismantle the simpler, but to re-installation is more complex, it includes the parts according to the requirements of the installation diagrams installed into components, assembled into a whole machine process, should also include the installation process of adjustment and installation of the test machine after the whole process, the above process of testing the end of the no problem, before the Can be used with peace of mind. Shredder rugged and durable not easy to fail, so that the damage to the shredder in order to increase the service life, for the user to bring more revenue.
Shredder can destroy the larger diameter of the material up to 3 meters, this scale range of all materials can be destroyed. Operation output value is high operation is simple and convenient, the whole production line only need three or four people can be. The viscosity of the material is large, the end of the broken more simple to adhere to the inside of the equipment, thus constantly increasing the resistance to crushing, and then affect the crushing power; the humidity of the material if the moisture in the material is too much, in the crushing operation is very simple to adhere to the blade in the metal shredder, increasing the resistance of the machine operation. If the machine is adhered to the end of the broken, in the process of conveying the material is simple to block, seriously affecting the machine's ability to shred.